LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Protege5 Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 279 (Wheel Alignment) >> Front Wheel Alignment >> Maximum Steering Angle Adjustment

Maximum Steering Angle Adjustment

WARNING: This page is about a different car, the 2003 Mazda Protege5 and 2003 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.
  1. Loosen the tie-rod end locknuts.
  2. Remove the steering gear boot clamp.
  3. Turn the left and right tie rods to equalize the length L.

    Maximum left/right difference 3 mm (0.12 in) 

    NOTE:
    • Turn the tie rods equally.
  4. Turn the tie rod to provide the correct maximum steering angle.
  5. Tighten the tie-rod end locknuts.
    Fig 1: Loosening The Tie-Rod End Locknuts
    G01913888Courtesy of MAZDA MOTORS CORP.

    Tightening torque 

    68.7-98.0 N.m (50.7-72.3 ft.lbf) 

  6. Verify that the boot is not twisted, and install the boot clamp.
  7. Adjust the toe-in after adjusting the steering angle.
scientia non olet · About LEMON Manuals