LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Protege ES, Standard >> Repair and Diagnosis >> Body & Frame >> Power Windows >> Power Window SUBSWITCH Removal/Installation >> Rear

Power Window SUBSWITCH Removal/Installation: Rear

  1. Disconnect the negative battery cable.
  2. Remove the tab by inserting a tape-wrapped, flathead screwdriver between the switch and the rear door trim.
    Fig 1: Removing/Installing Rear Power Window Subswitch
    G01186105Courtesy of MAZDA MOTORS CORP.
  3. Disconnect the connector, and remove the power window subswitch.
  4. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals