Hazard Switch Test

Place hazard switch in specified position and check for continuity between terminals. SeeHAZARD SWITCH TEST table. See Fig 1 . If continuity is not as specified, replace hazard switch. See HAZARD SWITCH under REMOVAL & INSTALLATION.

HAZARD SWITCH TEST

Switch Position

Continuity Between Terminals

Off

⁽¹⁾ F & G

A & B; ⁽¹⁾ F & G

⁽¹⁾	Terminals "F" and "G" are switch illumination circuit.

Fig 1: Identifying Hazard Switch Terminals

Courtesy of MAZDA MOTORS CORP.