Detection Condition

DTC is set when vehicle speed signal is less than 2.3 MPH for 25.6 seconds or more. After following condition are met:

• Shifter range is in D, S or L range (A/T).
• Shifter in gear and clutch pedal released (M/T).
• Charging efficiency is above 40 percent.
• Engine speed is above 2000 RPM.

This is a continuous monitor (CCM). MIL illuminates if PCM detects malfunction condition in 2 consecutive drive cycles. Pending code is available if PCM detects malfunction conditions during first drive cycle. Freeze Frame Data is available. Hold indicator light flashes and DTC is stored in the PCM memory.