LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> MX-5 Miata Base, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Shift Interlock Systems) >> Component Tests >> Shift Lock Actuator >> Millenia

Shift Lock Actuator: Millenia

WARNING: This page is about a different variant/trim than selected.
  1. Remove rear console and center panel. Turn ignition on. Measure voltage at selected connector terminals. See Figure . If voltage is not as specified, inspect harness and connector. Repair as needed. If harness and connector is okay, replace shift lock actuator. See SHIFT LOCK ACTUATOR  under REMOVAL & INSTALLATION.
  2. Turn ignition off. Check for continuity at selected connector terminals. If continuity is not as specified, inspect harness and connector. Repair as needed. If harness and connector are okay, replace shift lock actuator. See SHIFT LOCK ACTUATOR  under REMOVAL & INSTALLATION.
scientia non olet · About LEMON Manuals