LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> MX-5 Miata Base, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Self-Diagnostics >> Diagnostic Tests >> DTC P0327: Knock Sensor Circuit Low Input >> Detection Condition

Detection Condition

DTC is set when Power Control Module (PCM) detects input voltage from Knock Sensor (KS) is less than 1.25 volts after ignition is turned on. This is a continuous monitor (CCM). MIL illuminates if PCM detects malfunction condition in 2 consecutive drive cycles. Pending code is not available. Freeze Frame Data is available and DTC is stored in the PCM memory.

scientia non olet · About LEMON Manuals