LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> MX-5 Miata Base, Automatic >> Repair and Diagnosis >> Steering >> Steering Column >> Steering System >> Steering Gear And Linkage Disassembly/Assembly (Engine Speed Sensing Power Steering) >> Mounting Rubber Assembly Note

Mounting Rubber Assembly Note

  1. Apply soapy water to the rubber part of the mounting rubber.
  2. Press the mounting rubber until the mounting rubber end comes out completely from the gear housing using the SSTs  and a press.
    Fig 1: Assembling Mounting Rubber (1 Of 2)
    G01175098Courtesy of MAZDA MOTORS CORP.
  3. Reverse the gear housing, then press the mounting rubber until the mounting rubber end comes out completely from the other side. At this time, mounting rubber end and steel pipe are aligned.
    Fig 2: Assembling Mounting Rubber (2 Of 2)
    G01175099Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals