LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> MX-5 Miata Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Self-Diagnostics >> Diagnostic Tests >> DTC P0335: Crankshaft Position Sensor Circuit Malfunction >> Detection Condition

Detection Condition

DTC is set when there is no signal input from Crankshaft Position (CKP) sensor for 4.2 seconds while Mass Airflow (MAF) sensor output voltage is 2.0-4.9 volts. This is a continuous monitor (CCM). MIL illuminates if PCM detects malfunction condition in 2 consecutive drive cycles. Pending code is not available. Freeze Frame Data is available and DTC is stored in the PCM memory.

scientia non olet · About LEMON Manuals