Oil Hose Installation Note

Apply compressed air to cooler-side opening, and blow any remaining grime and foreign material from the cooler pipes. Compressed air should be applied for no less than one minute .

Fig 1: Applying Compressed Air To Cooler Pipes
Courtesy of MAZDA MOTORS CORP.
Align the marks, and slide the oil hose onto the oil pipe until it is fully seated as shown.

Fig 2: Matching Oil Hose & Oil Pipe Alignment Marks
Courtesy of MAZDA MOTORS CORP.
Install the hose clamp onto the hose. If reusing the hose, install the new hose clamp exactly on the mark left by the previous hose clamp.

Fig 3: Installing Hose Clamp Onto Hose
Courtesy of MAZDA MOTORS CORP.
Verify that the hose clamp does not interfere with any other components.