Wiring Harness: Overview

WARNING: This page is about a different car, the 2005 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.

To remove the wiring harness from the clip in the engine room, pry up the hook of the clip using a flathead screwdriver.

Fig 1: Removing Wiring Harness From Clip
Courtesy of MAZDA MOTORS CORP.
CAUTION:
- Do not remove the harness protective tape. Otherwise, the wires could rub against the body, which could result in water penetration and electrical shorting.
Fig 2: Do Not Remove Harness Protective Tape
Courtesy of MAZDA MOTORS CORP.