Pcm Removal/Installation

WARNING: This page is about a different car, the 2004 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

To replace the PCM, connect the WDS and perform the PCM configuration. (See PCM REPLACEMENT .)

Disconnect the negative battery cable.
Remove in the order indicated in the table.
Install in the reverse order of removal.

Fig 1: PCM Removal Sequence

Courtesy of MAZDA MOTORS CORP.

Fig 2: Removing/Installing PCM

Courtesy of MAZDA MOTORS CORP.