LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> MPV ES >> Repair and Diagnosis >> External Pages >> Different car >> Section 109 (Fuel System) >> After Repair Procedure >> Fuel Leakage Inspection

Fuel Leakage Inspection

WARNING: This page is about a different car, the 2004 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
  • Fuel line spills and leakage are dangerous. Fuel can ignite and cause serious injuries or death and damage. Always carry out the following procedure with the engine stopped.
CAUTION:
  • Connecting to the wrong check connector terminal may cause a malfunction. Carefully connect only to the specified terminal.
  1. Short the check connector terminal F/P to body GND using a jumper wire.
  2. Turn the ignition switch to the ON position to operate the fuel pump.
  3. Pressurize the system in this manner for at least 5 mins. to be sure there is no leakage.
    • If there is fuel leakage, inspect the fuel hoses, hose clamps, and fuel pipe sealing surface, and replace if necessary.
  4. After repair, assemble the system and repeat Steps  1 to  3 .
Fig 1: Locating Check Connector In Main Fuse Block
G01024544Courtesy of MAZDA MOTORS CORP.