LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> MPV ES >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Power Door Locks & Keyless Entry >> Removal & Installation >> Door Lock Control Module

Door Lock Control Module

  1. Disconnect the negative battery cable.
  2. Remove the passenger-side front side trim. See FRONT SIDE TRIM  .
  3. Disconnect the door lock control module connector.
  4. Remove the nut.
  5. Remove the door lock control module.
  6. Install in the reverse order of removal.
Fig 1: Removing Door Lock Control Module
G01196469Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals