LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> MPV ES >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Removal & Installation >> Cruise Control Switch Inspection

Cruise Control Switch Inspection

  1. Disconnect the negative battery cable.
  2. Remove the driver-side air bag module. See AIR BAG RESTRAINT SYSTEMS .
  3. Disconnect the cruise control switch connector.
  4. Measure the resistance and inspect for continuity between the cruise control switch terminals using an ohmmeter.
    • If not as specified, replace the cruise control switch.
    Fig 1: Inspecting Cruise Control Switch Continuity
    G01197201Courtesy of MAZDA MOTORS CORP.
    Fig 2: Inspecting Cruise Control Switch Connection
    G01197202Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals