LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> B4000 Base, Automatic >> Repair and Diagnosis >> Steering >> Power Steering >> Steering Gear Removal/Installation >> 4X2 Installation

4X2 Installation

  1. To install, reverse the removal procedure.
    1. Using the special tool, install new seals on the power steering return hose and power steering pressure hose.
      Fig 1: Installing Seals
      G02673393Courtesy of MAZDA MOTORS CORP.
    2. If necessary, remove the tie-rod ends.
    3. The dished side of the washer faces downward.
    4. Install a new intermediate shaft pinch bolt.
  2. Fill, purge, and leak check the power steering system.
  3. Check and if necessary, adjust the wheel alignment.
scientia non olet · About LEMON Manuals