LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> B2300 Standard >> Repair and Diagnosis >> Steering >> Power Steering >> Lock Cylinder Removal/Installation >> Lock Cylinder Functional

Lock Cylinder Functional

  1. Disconnect the negative battery cable.
  2. Insert the ignition key (2) and turn to the RUN position.
    Fig 1: Removing/Installing Lock Cylinder (Functional)
    G02673304Courtesy of MAZDA MOTORS CORP.
  3. Press the lock cylinder release pin (3) while pulling out the lock cylinder.
  4. Install in reverse order of removal.
  5. Verify lock cylinder operation.
scientia non olet · About LEMON Manuals