LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> 626 ES, Automatic >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> HVAC System >> Control System >> Swing Louver Inspection

Swing Louver Inspection

  1. Remove the meter hood. (See METER HOOD REMOVAL/INSTALLATION
  2. Connect battery positive voltage to terminal B and ground to terminal A of the swing louver.
  3. Verify that the swing louver operates as indicated in Fig 1 .
    • If not as specified, replace the swing louver.
      Fig 1: Swing Louver Switch Position Table
      G01136459Courtesy of MAZDA MOTORS CORP.
      Fig 2: Identifying Swing Louver Switch Circuit & Connector View
      G01136460Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals