LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> 626 ES, Automatic >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> HVAC System >> Control System >> Resistor Inspection

Resistor Inspection

  1. Remove the under cover.
  2. Disconnect the resistor connector.
  3. Check for continuity between terminal C and E of the resistor.
  4. Verify that the resistance between the terminals of the resistor is as shown in Fig 1 .
    • If not as specified, replace the resistor.
      Fig 1: Resistor Resistance Table, Circuit Diagram & Connector View
      G01136435Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals