LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> 626 ES, Automatic >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> HVAC System >> Control System >> Airflow Mode Actuator Inspection

Airflow Mode Actuator Inspection

  1. Remove the airflow mode actuator.
  2. Connect battery positive voltage to terminal B and ground to terminal D, and battery positive voltage to terminal D and ground to terminal B of the airflow mode actuator.
  3. Verify that the airflow mode actuator operates as shown in Fig 1 and Fig 2 .
    • If not as specified, replace the airflow mode actuator.
      Fig 1: Airflow Mode Actuator Movement Table, Circuit Diagram & Connector View
      G01136428Courtesy of MAZDA MOTORS CORP.
      Fig 2: Identifying Airflow Mode Actuator Positions
      G01136429Courtesy of MAZDA MOTORS CORP.
  4. Check for continuity between the airflow mode actuator terminals using an ohmmeter.
    • If not as specified, replace the airflow mode actuator.
      Fig 3: Airflow Mode Actuator Terminal Continuity Table
      G01136430Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals