LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2001 >> Tribute ES, 4WD >> Repair and Diagnosis >> Steering >> Steering Column >> Disabling & Activating Air Bag System >> Activating System

Activating System

    WARNING: Restraint system diagnostic tool is for restraint system repair only. Remove from vehicle prior to road use.
  1. Ensure positive and negative battery cables are disconnected. Wait one minute. Remove diagnostic simulators from driver's side air bag and passenger's side air bag wiring harness connector.
  2. Reconnect driver's side air bag connector to air bag module. Install driver's side air bag module on steering wheel. Tighten nut and washer assemblies to specification. See TORQUE SPECIFICATIONS  . Connect positive battery cable, then connect negative battery cable. Check AIR BAG light for system faults.
  3. Reconnect passenger's side air bag electrical connector. Connect positive battery cable. Connect negative battery cable. Check AIR BAG light for system faults.
  4. If equipped with side air bag, reconnect driver's side air bag module electrical connector. Reconnect driver's side seat belt buckle pretensioner electrical connector. Reconnect passenger's side air bag module electrical connector. Reconnect passenger's side seat belt buckle pretensioner electrical connector. Tighten nut and washer assemblies to specification. See TORQUE SPECIFICATIONS  . Connect positive battery cable, then connect negative battery cable. Check AIR BAG light for system faults.
scientia non olet · About LEMON Manuals