Hazard Switch

Place hazard switch in specified position and check for continuity between specified terminals. See HAZARD SWITCH TEST table. See Fig 1 . If continuity is not as specified, replace hazard switch. See HAZARD SWITCH under REMOVAL & INSTALLATION.

HAZARD SWITCH TEST

Switch Position

Continuity Between Terminals

Off

B & F; ⁽¹⁾ H & J

A, C, I & K; B & D; ⁽¹⁾ H & J

⁽¹⁾	Terminals "H" and "J" are switch illumination circuit.

Fig 1: Identifying Hazard Switch Terminals

Courtesy of MAZDA MOTORS CORP.