With A/C and Heater: Notes
WARNING: This page is about a different car, the 2005 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
- Slide out the rear climate control unit with the connectors still connected, (See REAR CLIMATE CONTROL UNIT REMOVAL/INSTALLATION .)
- Turn the ignition switch to ON position.
- Measure the voltage at each rear climate control unit terminal and refer to TERMINAL VOLTAGE TABLE .
- If there is any malfunction, inspect the parts listed under "Inspection item(s)" and the related wiring harness.
- If the parts and wiring harness under "Inspection item(s)" are found to be normal, replace the rear climate control unit.
- If there is any malfunction, inspect the parts listed under "Inspection item(s)" and the related wiring harness.