LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2001 >> B2500 SX, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 74 (Instrument Panel) >> Self-Diagnostic System >> Preliminary Procedure

Preliminary Procedure

WARNING: This page is about a different car, the 2002 Mazda B4000, 2002 Mazda B3000, and 2002 Mazda B2300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect NGS tester to Data Link Connector (DLC). Using NGS tester, perform DATA LINK DIAGNOSTIC TEST. If NGS tester does not communicate with vehicle, see MODULE COMMUNICATIONS NETWORK article to diagnose network concern.
  2. Using NGS tester retrieve and record continuous DTCs. Erase continuous DTCs. Perform GEM on-demand self-diagnostics using NGS tester. If any GEM DTCs are retrieved, perform appropriate test under SYSTEM TESTS. See GENERIC ELECTRONIC MODULE DTC DEFINITIONS  table. If no DTCs are retrieved, perform appropriate test under SYSTEM TESTS. See SYMPTOM CHART  table.
scientia non olet · About LEMON Manuals