Electrical System: Connectors: Inspection

WARNING: This page is about a different car, the 2004 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.

When a tester is used to inspect for continuity or measuring voltage, insert the tester probe from the wiring harness side.

Fig 1: Inserting Tester Probe From Wiring Harness Side
Courtesy of MAZDA MOTORS CORP.
Inspect the terminals of waterproof connectors from the connector side since they cannot be accessed from the wiring harness side.
CAUTION:
- To prevent damage to the terminal, wrap a thin wire around the lead before inserting into terminal.
Fig 2: Inspecting Terminals Of Waterproof Connectors From Connector Side
Courtesy of MAZDA MOTORS CORP.