Cylinder Block Specifications
WARNING: This page is about a different variant/trim than selected.
CYLINDER BLOCK
| Application | In. (mm) | ||||
|---|---|---|---|---|---|
| Cylinder Bore | |||||
| Standard | 3.2678-3.2684 (83.000-83.019) | ||||
| Oversize | |||||
| .010" (0.25 mm) | 3.2776-3.2783 (83.250-83.269) | ||||
| .020" (0.50 mm) | 3.2874-3.2881 (83.500-83.519) | ||||
| Maximum Taper & Out-Of-Round | .006 (.15) | ||||
| Minimum Deck Height (1) | 8.720 (221.5) | ||||
| Maximum Deck Warpage | .006 (.15) | ||||
|
|||||