Hazard Switch

WARNING: This page is about a different car, the 1999 Mazda Protege, 1999 Mazda Millenia, 1999 Mazda MX-5 Miata, and 1999 Mazda 626. However, it is still accessible from the selected car via links, so may be relevant.

Place hazard switch in specified position and check for continuity between specified terminals. See appropriate HAZARD SWITCH TEST table. See Fig 1, Fig 2 or Fig 3 . If continuity is not as specified, replace hazard switch. See HAZARD SWITCH under REMOVAL & INSTALLATION.

HAZARD SWITCH TEST (MILLENIA)

Switch Position

Continuity Between Terminals

Off

⁽¹⁾ "F" & "G"

"A" & "B"; ⁽¹⁾ "F" & "G"

⁽¹⁾	Terminals "F" and "G" are switch illumination circuit.

HAZARD SWITCH TEST (MX-5 MIATA)

Switch Position

Continuity Between Terminals

Off

"H" & "L"; ⁽¹⁾ "B" & "D"

"J" & "L"; "A", "C", "I" & "K"; ⁽¹⁾ "B" & "D"

⁽¹⁾	Terminals "B" and "D" are switch illumination circuit.

HAZARD SWITCH TEST (PROTEGE)

Switch Position

Continuity Between Terminals

Off

"B" & "F"; ⁽¹⁾ "H" & "J"

"A", "C", "I" & "K"; "B" & "D"; ⁽¹⁾ "H" & "J"

⁽¹⁾	Terminals "H" and "J" are switch illumination circuit.

HAZARD SWITCH TEST (626)

Switch Position

Continuity Between Terminals

Off

⁽¹⁾ "C" & "D"

"A" & "B"; ⁽¹⁾ "C" & "D"

⁽¹⁾	Terminals "C" and "D" are switch illumination circuit.

Fig 1: Identifying Hazard Switch Terminals (Millenia)

Courtesy of MAZDA MOTORS CORP.

Fig 2: Identifying Hazard Switch Terminals (MX-5 Miata & Protege)

Courtesy of MAZDA MOTORS CORP.

Fig 3: Identifying Hazard Switch Terminals (626)

Courtesy of MAZDA MOTORS CORP.