LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2000 >> MX-5 Miata Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 457 (Security System And Locks System) >> Sliding Door Lock And Opener Removal/Installation

Sliding Door Lock And Opener Removal/Installation

WARNING: This page is about a different car, the 2005 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Close the rear door glass completely.
  2. Disconnect the negative battery cable.
  3. Remove the sliding door trim. (See SLIDING DOOR TRIM REMOVAL/INSTALLATION .)
  4. Remove in the order indicated in the table.
    Fig 1: Removing Sliding Door Lock And Opener - With Torque Specifications
    G03701203Courtesy of MAZDA MOTORS CORP.
  5. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals