Plug Gap Inspection
WARNING: This page is about a different car, the 2005 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- To avoid possible damage to the tip, do not adjust the plug gap.
- To prevent damage to the tip, use a wire-type plug gap gauge when inspecting the plug gap.
- Measure the spark plug gap using the wire type plug gap gauge.
- If it is more than the maximum specification, replace the spark plug.
Standard plug gap
- 1.32-1.42 mm {0.051-0.055 in}