Ignition Coil Removal/Installation: L3

WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative battery cable.
Remove the plug hole plate. (See PLUG HOLE PLATE REMOVAL/INSTALLATION [L3] .)
Remove in the order indicated in the table.
With DEI system

Fig 1: Ignition Coil And High-Tension Lead (Torque Specs)
Courtesy of MAZDA MOTORS CORP.

With SEI system

Fig 2: Ignition Coil And Connector (Torque Specs)
Courtesy of MAZDA MOTORS CORP.
Install in the reverse order of removal.