Ignition Coil Removal/Installation: L3

WARNING: This page is about a different car, the 2004 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative battery cable.
Remove the plug hole plate. (See PLUG HOLE PLATE REMOVAL/INSTALLATION [L3] .)
Remove in the order indicated in the illustration.

Fig 1: Removing Plug Hole Plate Sequence
Courtesy of MAZDA MOTORS CORP.
Install in the reverse order of removal.

Fig 2: Identifying Connector, High Tension Lead & Ignition Coil
Courtesy of MAZDA MOTORS CORP.