Valve Body Assembly: Reassembly

Reassemble valve bodies. Install check balls, oil strainers and jet orifices in correct location. See Fig 2 .

NOTE: Each type of bolt has a different letter on its head. Match bolt letter with letter stamped next to its installation hole on valve body.

During assembly of valve body, ensure bolts are installed in correct location. Ensure valve body gaskets are installed in correct location. See Fig 6 . Tighten all bolts to specification. See TORQUE SPECIFICATIONS .

Fig 1: Exploded View Of Valve Body Assembly

Courtesy of MAZDA MOTORS CORP.

Fig 2: Locating Valve Body Components

Courtesy of MAZDA MOTORS CORP.

Fig 3: Exploded View Of Main Valve Body

Courtesy of MAZDA MOTORS CORP.

Fig 4: Exploded View Of Pre-Main Valve Body

Courtesy of MAZDA MOTORS CORP.

Fig 5: Exploded View Of Rear Valve Body

Courtesy of MAZDA MOTORS CORP.

Fig 6: Identifying Valve Body Gaskets

Courtesy of MAZDA MOTORS CORP.

VALVE BODY SPRING FREE LENGTH SPECIFICATIONS

Application			In. (mm)
Band Servo Return Spring			1.703 (43.25)
Coasting Clutch
Spring & Retainer Component			1.242 (31.54)
Control Valve Body
By-Pass Spring			1.16 (29.5)
Coast Timing Spring			1.10 (28.0)
Converter Relief Spring			1.27 (32.3)
Cut Back Spring			1.17 (29.8)
Low Reducing Spring			1.51 (38.3)
"N"-"D" Accumulator Spring			2.08 (52.9)
"N"-"R" Accumulator Spring
Small			2.37 (60.1)
Large			2.20 (56.0)
Pressure Modifier Accumulator Spring			1.50 (38.2)
Pressure Modifier Spring			0.75 (19.0)
Pressure Regulator Spring			1.33 (33.9)
Solenoid Reducing Spring			1.56 (39.7)
TCC Shift Spring			1.57 (40.0)
1-2 Accumulator Spring
Small			3.21 (81.6)
Large			3.21 (81.6)
1-2 Shift Spring			1.44 (36.6)
2-3 Shift Spring			1.44 (36.6)
2-3 Timing Spring			0.878 (22.30)
3-2 Timing Spring			1.39 (35.4)
3-4 Shift Spring			1.44 (36.6)
Low-Reverse Brake Spring			0.7114 (18.070)
Oil Pump Spring			2.09 (53.0)
2-3 Accumulator
Orifice Check Valve Spring			0.512 (13.00)
2-3 Accumulator Spring			3.06 (77.7)
3-4 Clutch Spring			1.52 (38.7)