LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2000 >> MPV ES >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Overhaul - GF4A-El >> Component Disassembly & Reassembly >> Torque Converter

Torque Converter

  1. Torque converter is a sealed unit and cannot be disassembled for service. Inspect for damage and cracks. Replace torque converter if defective. Remove any rust from pilot hub and boss of converter. Replace torque converter if converter boss bushing inner diameter exceeds specification. Maximum bushing diameter on converter is 2.088" (53.03 mm).
  2. Flush torque converter. After converter is removed from cleaner, thoroughly drain solvent through hub. Add about .53 qt. (.5L) clean ATF to converter. Agitate fluid by hand. Drain ATF from converter.
scientia non olet · About LEMON Manuals