LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2000 >> MPV ES >> Repair and Diagnosis >> General Information >> OBD-II Drive Cycles >> Drive Cycles >> 1999: B2500, B3000, B4000 >> Monitor Repair Verification Drive Cycle >> Comprehensive Component Monitor Repair Verification Drive Cycle

Comprehensive Component Monitor Repair Verification Drive Cycle

  1. PerformVehicle Preparation For Drive Cycles .
  2. Go through the entire OBD-II Drive Cycle until the Comprehensive Component Monitor shows the completion status by clearing the code P1000 on the NGS tester.
    • If not completed, turn the key to OFF and repeat step 2 at least one more time.
  3. Perform Continuous Memory, KOEO and KOER ON-DEMAND SELF-TESTS.
  4. Verify no DTCs are available.
scientia non olet · About LEMON Manuals