Hazard Switch
WARNING: This page is about a different car, the 2002 Mazda 626. However, it is still accessible from the selected car via links, so may be relevant.
Place hazard switch in desired position and check for continuity between specified terminals. See HAZARD SWITCH TEST table. See Fig 1 . If continuity is not as specified, replace hazard switch. See under REMOVAL & INSTALLATION.
HAZARD SWITCH TEST
| Switch Position | Continuity Between Terminals | ||
|---|---|---|---|
| Off | (1) C & D | ||
| On | A & B; (1) C & D | ||
|
|||