LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2000 >> MPV ES >> Repair and Diagnosis >> External Pages >> Different car >> Section 514 (Lighting System) >> Ignition Key Illumination Bulb Removal/Installation

Ignition Key Illumination Bulb Removal/Installation

WARNING: This page is about a different car, the 2005 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the column cover. (See COLUMN COVER REMOVAL/INSTALLATION .)
  3. Remove the ignition key illumination bulb.
  4. Install in the reverse order of removal.
    Fig 1: Removing Ignition Key Illumination Bulb
    G03703325Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals