No-load test
WARNING: This page is about a different car, the 2005 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
- Verify that the battery is fully charged.
- Connect the starter, battery, and a tester as shown in the figure.
- Operate the starter and verify that it rotates smoothly.
- If the starter does not rotate smoothly, inspect the starter unit.
- Measure the voltage and current while the starter is operating.
- If not within the specification, replace the starter.
STANDARD SPECIFICATION
| Item | |
|---|---|
| Voltage (V) | Current (A) |
| 11 | AT: 105 or less MT: 90 or less |