Generator Inner Parts: Brush

WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

Inspect brushes for wear.
- If any brush is worn almost to or beyond the limit, replace all of the brushes.
  Standard
  
  L3: 18.5 mm {0.73 in}
  
  AJ: 22.5 mm {0.89 in}
  
  Minimum
  
  5.0 mm {0.20 in}
  
  Fig 1: Inspecting Brushes
  Courtesy of MAZDA MOTORS CORP.