LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2000 >> MPV ES >> Repair and Diagnosis >> External Pages >> Different car >> Section 361 (On-Board Diagnostic (Engine Control System (L3)) >> OBD-II Drive Mode >> EGR System Repair Verification Drive Mode

EGR System Repair Verification Drive Mode

WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Perform "PCM Adaptive Memory Production Drive Mode" first.
  2. Verify all accessory loads (A/C, headlights, blower fan, rear window defroster) are off.
  3. 3. Drive the vehicle as shown in the graph.
  4. Stop the vehicle and access ON BOARD SYSTEM READINESS menu of GENERIC OBD-II FUNCTION to verify the OBD monitoring status.
    • If completed, the OBD monitoring status items change from non-completed to completed.
    • If not completed, turn the ignition switch off then repeat from Step  3.
  5. Access DIAGNOSTIC MONITORING TEST RESULTS menu of GENERIC OBD-II FUNCTIONS to verify the monitor results.
    • If detected values are not within specification, repair has not been completed.
  6. Verify no DTCs are available.
    Fig 1: Vehicle Speed Graph
    G03643429Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals