LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2000 >> MPV ES >> Repair and Diagnosis >> External Pages >> Different car >> Section 341 (Lighting Systems) >> Steering Column MULTIFUNCTION Switch >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2003 Mazda Tribute. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery ground cable. Refer to BATTERY DISCONNECT .
    Fig 1: Removing Upper Steering Column Shroud
    G01904152Courtesy of MAZDA MOTORS CORP.
  2. Remove the upper steering column shroud.
    Fig 2: Removing Lower Steering Column Shroud
    G01904153Courtesy of MAZDA MOTORS CORP.
  3. Remove the lower steering column shroud.
    1. Remove the screws.
    2. Remove the lower steering column shroud.
      Fig 3: Removing Multifunction Switch
      G01904154Courtesy of MAZDA MOTORS CORP.
  4. Remove the multifunction switch.
    1. Disconnect the electrical connector.
    2. Remove the screws.
    3. Remove the multifunction switch.
  5. To install, reverse the removal procedure.