Removal and Installation

WARNING: This page is about a different car, the 2003 Mazda Tribute. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Positioning Boot

Courtesy of MAZDA MOTORS CORP.

Position the boot aside.

Fig 2: Loosening Pinch Bolt/Nut
Courtesy of MAZDA MOTORS CORP.
Loosen the pinch bolt/nut and disconnect the steering column shaft from the flexible coupling.

Fig 3: Removing Steering Gear Coupling
Courtesy of MAZDA MOTORS CORP.
Remove the steering gear coupling.
1. Position aside the rubber boot.
2. Remove the pinch bolt.
To install, reverse the removal procedure.