LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2000 >> MPV ES >> Repair and Diagnosis >> External Pages >> Different car >> Section 172 (Ignition System) >> Ignition Coil Removal/Installation >> AJ

Ignition Coil Removal/Installation: AJ

WARNING: This page is about a different car, the 2004 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. LH: Remove the plug hole plate. (See TIMING CHAIN REMOVAL/INSTALLATION [AJ] .)

    RH: Remove the dynamic chamber. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [AJ] .)

  3. Remove in the order indicated in the illustration.
    Fig 1: Removal Order
    G01027590Courtesy of MAZDA MOTORS CORP.
  4. Install in the reverse order of removal.
    Fig 2: Installing Connector & Ignition Coil
    G01027591Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals