LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2000 >> MPV ES >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Engine Controls - System & Component Testing) >> Relays & Solenoids >> Main Relay

Main Relay

WARNING: This page is about a different car, the 2001 Mazda Protege, 2001 Mazda Millenia, 2001 Mazda MX-5 Miata, 2001 Mazda MPV, and 2001 Mazda 626. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ensure main relay clicks when ignition is turned on and off. If no sound is heard, locate and remove main relay from main fuse block, in left side of engine compartment. Using ohmmeter, check continuity between main relay terminals "C" and "D". See Figure . Continuity should not be present.
  2. Using fused jumper wires, apply battery voltage to main relay terminal "A" and ground terminal "B". Continuity should be present between main relay terminals "C" and "D". If continuity is not as specified, replace main relay.
scientia non olet · About LEMON Manuals