LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2000 >> MPV ES >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System & Component Testing >> Emission Systems & Sub-Systems >> Fuel Evaporation (MPV) >> Whole System Test

Whole System Test

NOTE: Test must be performed within 10 minutes and without starting engine. Do not exceed 6.4 kPa pressure in EVAP system.

Disconnect vacuum hose from catch tank to purge solenoid valve at valve. Connect hose to vacuum pump. Connect scan tool. Select ON BOARD DEVICE CONTROL. Return to scan tool main menu and select PID monitor. Select FTP PID. Apply 1.7 kPa vacuum. Vacuum should hold for at least two minutes. If vacuum does not hold, check FTP sensor. Replace as necessary. If sensor is okay, replace hose and go to CHARCOAL CANISTER-TO-PURGE SOLENOID TEST  .

scientia non olet · About LEMON Manuals