LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2000 >> MPV DX >> Repair and Diagnosis >> External Pages >> Different car >> Section 93 (Power Door Locks & Keyless Entry) >> Removal & Installation >> Door Lock Control Module

Door Lock Control Module

WARNING: This page is about a different car, the 2002 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the passenger-side front side trim. See FRONT SIDE TRIM  .
  3. Disconnect the door lock control module connector.
  4. Remove the nut.
  5. Remove the door lock control module.
  6. Install in the reverse order of removal.
Fig 1: Removing Door Lock Control Module
G01196469Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals