Antenna Mast Installation
WARNING: This page is about a different car, the 2005 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
- Turn the ignition switch to the ON position or the ACC position.
- Straighten the warp of rack end.
- Audio power switch is the ON position.
- Press AM/FM button and turn on the radio.
- Turn audio power switch off, then immediately insert the rack into the power antenna.
- After the antenna mast is fully retracted, tighten the mounting nut to the specification.
Tightening torque
- 1.5-2.9 N.m {15-30 kgf.cm, 14-26 in.lbf}
- Verify that the power antenna operates smoothly when the audio unit radio is on.