Resistance Inspection
WARNING: This page is about a different car, the 2005 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- Perform the following test only when directed.
- Disconnect the fuel injector connectors.
- Measure the resistance of the fuel injector using an ohmmeter.
- If as specified but the On-vehicle Inspection failed, perform the "CIRCUIT OPEN/SHORT INSPECTION ".
- If not as specified, replace the fuel injector. (See FUEL INJECTOR REMOVAL/INSTALLATION (+)
Resistance
- 12-13 ohms (20°C {68°F})