LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2000 >> MPV DX >> Repair and Diagnosis >> External Pages >> Different car >> Section 150 (Exterior/Interior Trim) >> Trim >> Regulator Handle Installation

Regulator Handle Installation

WARNING: This page is about a different car, the 2002 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the clip in the regulator handle.
  2. Close the door glass fully and push the regulator handle on as shown.
Fig 1: Installing Regulator Handle
G01196354Courtesy of MAZDA MOTORS CORP.