LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2000 >> MPV DX >> Repair and Diagnosis >> External Pages >> Different car >> Section 142 (Rear Suspension System) >> General Procedures >> Toe Control Link >> Toe Control Link Removal/Installation >> Toe Control Link Ball Joint Installation Note

Toe Control Link Ball Joint Installation Note

WARNING: This page is about a different car, the 2004 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.

Install the toe control link ball joint so that the ball joint stud projection is within -2-4 mm (-0.08-0.15 in).

Fig 1: Identifying Ball Joint Installation Depth
G00379512Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals