LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2000 >> B2500 SX, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Engine Controls - System & Component Testing) >> Engine Sensors & Switches >> Knock Sensor >> MPV

Knock Sensor: MPV

WARNING: This page is about a different car, the 2000 Mazda Protege, 2000 Mazda Millenia, 2000 Mazda MX-5 Miata, 2000 Mazda MPV, and 2000 Mazda 626. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect knock sensor connector. Using ohmmeter, measure resistance between knock sensor terminals "A" (Red wire) and "B" (Black wire). Resistance should be about 560,000 ohms at 68°F (20°C). If resistance is not as specified, replace knock sensor.

scientia non olet · About LEMON Manuals