LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2000 >> B2500 SE, 2D Pickup, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Antilock Brake System) >> Abs HU/Cm Removal/Installation >> Connector Removal Note

Connector Removal Note

WARNING: This page is about a different car, the 2004 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Pull the lock lever up, and then remove the connector.
    Fig 1: Locating Lock Lever Removal Direction
    G01344985Courtesy of MAZDA MOTORS CORP.